News classification
- Glass fiber reinforced plastic products
- Anticorrosion construction of glass fiber reinforced plastics
- Glass fibre reinforced plastic tile
- Glass steel cooling tower
- Glass fiber reinforced plastic fan
- Glass fibre reinforced plastic chimney
- frp grating
- Toughened glass tank
- Glass fiber reinforced plastic water tank
- 0
- Glass fiber reinforced plastic pipe
- Glass fiber reinforced plastic mortar pipe
- Glass fiber reinforced plastic water tank
- Glass fiber reinforced plastic storage tank
- Integrated prefabricated pumping station
- FRP cover plate
- FRP manufacturer
Contact us
- Add: Suzhou, Changzhou, Wuxi, Shanghai FRP anti-corrosion products
- Tel: 【加微信时须说明您的单位名称和手机号码】
- Fax: 131-9671-3587（推销勿扰。不接同行业务）
- Email: 主要为长三角地区提供玻璃钢防腐制品定制
The installation, use and notice of FRP beating door -- FRP anticorrosion factory
Jiangsu glass fiber reinforced plastic factory. Shanghai glass fiber reinforced plastic products. Nantong glass steel tank mist purification tower exhaust gas purification tower / Changzhou / Wuxi glass steel grille sculpture desulfurization tower, Suzhou FRP pipe, glass steel door installation and precautions
1, door installation can be connected with flange and exergy embedded plate welding, or pouring two times
2, in the process of using the door, it can change the proportion of the door page by the way of water injection or water drainage to the sealing cavity of the door page, so as to achieve the best opening effect.
3, the door is installed, and the clearance between the portal page about 3mm is a normal phenomenon, a door leaf under reverse pressure when certain gap will decrease and disappear.
4, the door should be used in the process of maintaining its flow channel, the ring is not blocked by stones, branches and other debris, thereby affecting the sealing effect.
5, always clean up the door below the sediment sand pool, keep the door hinge support ears, good lubrication and flexible open.
FRP anti-corrosion manufacturers prompt you: Please click on [glass fiber reinforced plastic door] to see more "FRP beat the door installation, use and precautions" related information
2, in the process of using the door, it can change the proportion of the door page by the way of water injection or water drainage to the sealing cavity of the door page, so as to achieve the best opening effect.
3, the door is installed, and the clearance between the portal page about 3mm is a normal phenomenon, a door leaf under reverse pressure when certain gap will decrease and disappear.
4, the door should be used in the process of maintaining its flow channel, the ring is not blocked by stones, branches and other debris, thereby affecting the sealing effect.
5, always clean up the door below the sediment sand pool, keep the door hinge support ears, good lubrication and flexible open.
FRP anti-corrosion manufacturers prompt you: Please click on [glass fiber reinforced plastic door] to see more "FRP beat the door installation, use and precautions" related information
