Installation method of glass fibre reinforced plastic cable support
It is easy to install and can be embedded, installed or expanded by screws, but it is especially smooth for the cable trench wall. The cable layer changes can not be dealt with. Direct buried cable support: convenient installation, but the cable trench wall requirements are particularly smooth, the design of different layers of cable trench can be built. Plug in cable support: installation is not convenient, the cable trench wall requirements are smooth, the design of different layers of cable trench can be built. Bolt type cable support: it is easy to install, smooth to the cable trench wall, and can be used for the design of cable trench with different layers.
Installation method of combined type cable support
A glass bracket comprises a steel column and a bracket, a pin (bolt) and polymer fixing cap, installation tool for ordinary drill, drill and spanner.
1, post installation: column back positioning line with mounting holes, with aperture 12.5, according to the installation drawings and post installation hole position, using M12 column expansion bolts fixed on the wall between the bolt and the column must be installed gasket groove shaped column as far as possible close to the wall.
2: Cable: cable to cable support installation position.
3, the installation: according to the arm spacing, upright position on both sides of line has been set aside with a mounting hole, the aperture diameter of 8.5; the bracket is fixed on the groove column bolt, bolt and bolt upright between moderate tightness, attention must be paid to the installation.
4, place: fixed cable and cable placed on the bracket and lashing, placed as the heaviest on the cable roots
Bolt type cable bracket mounting method
Bolt type composite cable support. Bolt type cable support is used in the trench wall into the expansion screw 2 Phi Phi 12- 14 will support direct fixation, convenient installation, the cable trench wall levelled, cable trench on the design of different layers to construction.
Directly buried type cable support mounting method
The directly buried cable support is a slender resin composite rod, the front part is used for supporting the supporting section of the cable, and the upper surface of the supporting section is provided with 2 to 3 grooves, the cable is arranged in the groove, and the stability is good. The tail section is inserted into the bracket can be inserted into the wall, the inserting section is a flat top cross stiffener, coinciding with the same thickness of brick, masonry wall in cable ditch built into the wall, very convenient.