Glass fiber reinforced plastic cooling tower is a common equipment used in industrial circulating cooling water treatment. In the use of the problem encountered when there is no filler, how to solve it? The Yellow River Henan glass fiber reinforced plastic cooling tower manufacturer for your analysis:
1 to reduce the water fly
(1) the air passage of the water collector is staggered and the material is improved, so as to avoid the adoption of a straight air duct, which can not only ensure the atomization effect, but also effectively reduce the amount of the upper water spray passing through the water receiver.
(2) to adjust the spray direction and angle of the atomization device, and reduce the occurrence of the phenomenon that the upper water spray passes through the water receiver.
(3) try to improve the installation height of the water collector, if necessary, change the foundation support and raise the upper tower body of the air inlet. Glass fiber reinforced plastic cooling tower manufacturers analysis encountered no filler solution
2 installation set water retaining water
In the upper air inlet section is mounted with a ring of water retaining plate made of stainless steel, and the collecting bucket cylindrical part is tightly connected with the water retaining plate, the specific situation of the cooling tower and highly regarded, with water drops splashing.
3 improve the quality of circulating cooling water
(1) if the water storage tank is open, it should be covered and sealed.
(2) a diversion hole is arranged on the upper part of the partition wall of the cold and hot water storage tank, and the cold water pool is connected with a water replenishing pipe, and the hot water tank is connected with the overflow pipe to reach the water level balance of the two water tanks, so as to balance the system operation and reduce the energy consumption.
(3) the bottom of the storage tank is cleaned regularly to ensure the quality of the cooling water.
(4) add filter in the lower drain pan.
The most important function of the glass fiber reinforced plastic cooling tower is to transfer the waste heat into the air and disperse it in the atmosphere. We'll have it in some power plants. The water will be heated to produce some of the high-pressure gas after use, and the high pressure gas turbine generator to make thrust case, but the remaining second is cooling, it can play a role in this time of products.
In our lives, we can also see the use and role of FRP cooling tower. Office or shopping center in the central air conditioning will have its participation, so as to achieve the effect of cooling liquid circulation. And some professional manufacturers will produce a wide range of products, we can according to their own needs to purchase the product, so as to allow the product to better play its own advantages and role. Glass fiber reinforced plastic cooling tower manufacturers analysis encountered no filler solution