Self leveling epoxy floor construction requirements in the temperature on the floor formula design should not only meet the coating performance requirements, must also take into account the performance of construction, consideration should be given to the floor under different temperature conditions of different construction methods adaptable and easy to operate, self leveling epoxy floor on the construction performance requirements should be so high. Requirements of epoxy self leveling floor in construction temperature
Epoxy self leveling floor construction temperature: epoxy floor construction temperature of 5-35 DEG C, but the temperature range for the use of thinner epoxy self leveling floor is still a wide range of temperature. The self leveling viscosity temperature greatly affected, so that the self leveling floor suitable viscosity at low temperature "like water flowing to trowelling construction in high temperature construction. The high temperature viscosity suitable for self leveling at low temperature is too thick coating and the surface is not easy levelling. Therefore, the epoxy self leveling flat generally need to set up two types of winter and summer to adapt to different regions, different seasons of environmental factors, especially changes in temperature factors.
Construction of self leveling epoxy floor coating: epoxy self leveling floor is the traditional construction method is the commonly used method. The advantages of trowelling construction is simple, easy to train, but the construction efficiency is low, the artificial trowelling plane of flow rate of 300-500 square /8 hours. Trowelling self leveling construction by coating bottom shearing effect of apparent viscosity, coating thickness, fatigue degree of construction of the hand, long time operation and the viscosity and thixotropy of the coating. Too small viscosity and thixotropic coating will be trowelling construction difficult. The flow rate of the coating in airless spraying depends on the power of the spray gun and the viscosity of the coating. If the viscosity of the coating increases, the flow rate of the spray gun will be reduced, and the construction efficiency will be reduced. The viscosity of the coating is low, which can not only improve the construction efficiency, but also reduce the amount of paint and increase the freedom of construction.
Epoxy floor variety, uneven; so that customers worry when choosing epoxy floor, epoxy floor that is what is the difference between how, some expensive, some cheap, what is the difference between them; we refer to customers with a selection of affordable epoxy floor is not to say that the cheaper the better, but choose a suitable plant and meet the requirements of the epoxy flooring products factory. Requirements of epoxy self leveling floor in construction temperature