Glass fiber reinforced plastic desulfurization tower:
Glass steel desulfurization tower is the use of travel flow technology, jet technology, pressure atomization technology and Venturi tube technology in alkaline solution as the carrier, the harmful substances in the smoke and dust, sulfur dioxide and hydrocarbons from flue gas separation, absorption of settlement, and finally achieve the purpose of purifying smoke gas. Products with wear resistance, corrosion resistance, service life of more than 10 years.
Dust removal efficiency of glass steel desulfurization tower was 98%, 90% desulfurization efficiency, flue gas blackness level 0-1. Desulfurization tower equipment resistance is less than 1500pa.
Two, the current market comparison of desulfurization tower material.
Granite based desulfurization tower based small lightweight, corrosion resistance of glass steel is a good corrosion-resistant materials, has good resistance to air, water and acid, alkali, salt and a variety of oils and solvents. Has been applied to all aspects of chemical corrosion, carbon steel, stainless steel, are replacing wood, non-ferrous metals such as carbon steel as the inside glass flake or other anticorrosive materials, corrosion in itself, but the change of temperature of flue gas (flue gas desulfurization system when the fault line temperature up to 150 degrees Celsius), thermal cracking caused by lining up to reduce the corrosion resistance.
The granite itself is resistant to corrosion, but the gap between the granite filling material of poor corrosion resistance, especially in the case of thermal expansion, the gap will cause crack and leakage, unable to run the process of plant machine winding under pressure conditions, according to the shape, technical requirements, use flexibly molding process. Field production, poor process.
Glass steel desulfurization tower features:
1, the working principle of washing, dust removal and desulfurization efficiency, capture more harmful gases.   
2, dehydration board design is reasonable, unique, dehydration effect is good. The utility model is characterized in that the dewatering plate is provided with a dewatering device, and the dewatering plate is reasonable and unique, and when the mist is passed through the dehydration device, the utility model can be changed into a direction by collision and closure, and flows along the wall of the cylinder, so as to prevent two times of water.   
3, small resistance, water saving, energy saving, low operating costs. The flue gas from the lower part of the cylinder into the natural, large cross-section, the wind speed is small, so the gas resistance is small, the main resistance is less than or equal to 900Pa, the resistance of the system is less than 1200Pa. Because the resistance is small, the power consumption is small. In addition to discharge water through precipitation, recycle, on the one hand, conservation of water resources, on the other hand to prevent sewage into the sewer, cause two pollution, saving water and energy saving effect, the operating cost is reduced.   
4, small size, light weight, small footprint, easy installation and transportation. This product is a cylindrical body, belongs to the whole structure, the factory with support, installation, load is very convenient, can according to the size of the local ground situation, so hanging overhead laying, installation and other ways, strong adaptability.   
5, the operation is relatively simple, convenient, minimal maintenance, easy operation, management, maintenance, high operating rate, to adapt to a variety of working conditions.   
6, the flue gas concentration fluctuations in the SO2 strong adaptability, different desulfurization process can be adapted to different sulfur content in coal; desulfurization agent can choose lime, alkali, Magnesium Oxide and other forms, can achieve good desulfurization effect