Glass steel fan is made of glass steel anti corrosion materials manufacturing centrifugal fan of a shell, has strong anticorrosion performance, long service life, stable operation and other characteristics, can be used in corrosive gas environment, emission of corrosive gases. The gas transported is not allowed to contain sticky substances, the dust and hard particles are less than or equal to 150mg/m3, the gas temperature is less than or equal to 60 degrees, and the relative humidity is less than or equal to 1.
FRP fan installation:
For use in gas transportation, large glass steel centrifugal fan should be installed on a concrete foundation, the wind pipe is arranged in the middle, the wind can be installed in the bracket with the angle steel, then the bracket fixed on the wall and column, or concrete floor. The special requirements of the situation on the isolation, the fan device in damping pedestal.
FRP fan maintenance:
1, the use of the environment should always be kept clean, fan surface clean, inlet and outlet should not be debris, regular removal of fan and pipe dust and other debris.
2, only in the fan completely normal operating below, and to ensure that the power supply facilities capacity sufficient, voltage stability, non defect operation, power supply line must be as the special line, should not be long-term use of temporary power supply lines.
3, fan in the operation process found that fan abnormal sound, motor serious fever, shell live, switch tripping, can not start, and so on, should immediately stop inspection. In order to ensure safety, it is not allowed to carry out maintenance during the operation of the fan. After commissioning, the test should be carried out for about five minutes, and no abnormal phenomenon will be confirmed.